Most home security checklists were written with a long weekend in mind. Lock the doors, pause your mail, tell a neighbor. That advice is fine if you are driving to Wisconsin for a few days. It is not enough if you are flying to Italy for two weeks.

When you are traveling abroad, the gap between an alarm going off and you being able to respond is not a few minutes. It could be hours, depending on time zones, cell coverage, or whether it is 3 AM where you landed. That gap is exactly what burglars count on, and it is exactly what this checklist is designed to close.

Why Summer Travel Creates a Unique Security Risk for Chicago Homeowners

Summer is peak travel season in the Chicago area, and it is also peak burglary season. Nationally, home burglaries rise significantly between June and August. Chicago’s own residential burglary data shows the highest monthly totals consistently occurring in the warmer months, with August historically representing the peak.

Most burglaries are opportunistic. A home that looks vacant for an extended period, no movement, no lights, accumulated mail, an uncut lawn, is a much easier target than one that shows signs of activity. A three-day absence reads differently than a 12-day absence, and experienced burglars can tell the difference.

The other factor that changes with international travel is your response capability. When you are in the same time zone, an alert on your phone means you can call a neighbor, contact your monitoring company, or drive home if needed. When you are eight hours ahead, that same alert may arrive at 2 AM your time, with none of those options immediately available. That is why preparation before you leave matters more than it does for any other kind of trip.

Your Step-by-Step Home Security Checklist Before Traveling Abroad

Work through these before your departure date, not the night before your flight.

1. Test Your Entire Security System

Do not assume your system is working correctly because it was installed correctly. Before any extended trip, walk through a full test:

• Trigger each door and window sensor and confirm it registers
• Check every motion detector for proper coverage and sensitivity
• Pull up each camera feed and confirm the image is clear, properly angled, and recording to the right location
• Verify your alarm panel shows no open or faulted zones
• Confirm your siren and backup battery are functional

If anything is not working as expected, address it before you leave, not after you land. If your system has not been serviced recently or you are unsure of its current status, contact Chicago Security Expert before your departure date.

2. Contact Your Alarm Monitoring Company Before You Leave

This is the most important step on this list, and it is almost entirely absent from the advice that ranks online.

Here is the problem: when your alarm triggers, most monitoring companies are programmed to contact the homeowner first before dispatching. That protocol exists to reduce false alarm responses. But if you are 7 hours ahead in a different country and your phone is on airplane mode, that call goes unanswered. Dispatch may still happen, but valuable minutes are lost, and your response window shrinks.

Before an international trip, call your monitoring company and provide:

• Your travel dates and destination
• A local emergency contact in Chicago who can respond on your behalf
• Your preferred international contact method (WhatsApp, international number, wifi-only communication)
• Instructions for how you want them to proceed if they cannot reach you

If you do not yet have professional monitoring on your system, this is the trip that should change that. Remote cameras you can view are useful. A monitored system that takes action when you cannot is essential.

3. Verify Remote App Access Before You Are at the Airport

Many homeowners discover their remote access is not set up correctly the first time they actually need it. Test everything while you are still home:

• Log into your security app and confirm you can view all camera feeds
• Verify push notifications are enabled and arriving on your device
• Confirm your login credentials are saved and accessible
• Check whether your cell plan supports international data, or set notifications to wifi-only if needed
• If your system uses two-factor authentication, make sure you can complete it from abroad without issues

Walk through a full remote login as if you were already overseas. If anything does not work, troubleshoot it now.

4. Adjust Camera Zones and Motion Alert Thresholds

An international trip is not the time to be flooded with alerts every time a car drives past or a branch moves in the wind. Before you leave, adjust your camera and motion sensor settings so the alerts you receive are meaningful:

• Set detection zones to focus on entry points: front door, back door, garage, and any side access points
• Reduce sensitivity for areas with regular ambient movement (street-facing cameras, backyard trees)
• Enable alerts specifically for the zones that matter, door-triggered, motion near entry points, and package drop areas if applicable

Chicago homes with detached garages, side gangways, or long driveways have more potential blind spots than a standard suburban layout. Make sure your camera coverage accounts for those before you leave.

5. Physically Secure Every Entry Point

Walk the perimeter of your home before your departure and check:

• All doors locked with deadbolts engaged
• All ground-floor and accessible windows locked
• Sliding doors secured with a secondary bar or dowel in the track
• Garage door closed and the interior access door from the garage into the home locked
• Any gate latches or fence entry points secured

If your system includes contact sensors on windows or doors, verify each one is showing as closed in your panel. Do not rely on memory. Walk the whole house.

6. Put Lighting on a Realistic Schedule

A home that goes dark every night at the same time broadcasts automation. Stagger your timers or smart light schedules to vary the pattern by day. A lamp in the living room from 7 PM to 10 PM on Monday, 6 PM to 11 PM on Tuesday, and so on reads more like a lived-in home than a fixed on/off cycle.

If you have smart lights integrated with your security system, set this up through the app before you leave and test it. Outdoor motion-activated lighting is also worth verifying is functional and properly aimed, particularly near entry points.

7. Manage Mail, Deliveries, and Visible Accumulation

A visible buildup outside your home is one of the clearest signals of an extended absence. Before you leave:

• Place a hold with USPS for the duration of your trip
• Pause or redirect any regular package deliveries
• Arrange lawn care if you will be gone through a mowing cycle in summer
• In winter, arrange snow removal for the driveway and walkways
• Ask your trusted contact (see Step 8) to make occasional passes by the property

No security system compensates for a front porch that has not been touched in 10 days.

8. Brief a Trusted Local Contact

Before you leave, identify one person who has both the means and the permission to act on your behalf. Provide them with:

• A spare key or temporary smart lock code
• Your travel dates and a rough itinerary
• Your alarm monitoring company’s name and local dispatch number
• Specific instructions: what to check, when to check it, and when to call the police versus call you first

This person is not just a key holder. They are your local proxy while you are unreachable. Choose accordingly.

9. Review Your Homeowner’s Insurance

Before an extended international trip, take ten minutes to confirm:

• Your policy covers theft and property damage during an extended vacancy
• You understand any vacancy clauses that may apply (typically triggered at 30 to 60 days, not relevant for most international trips, but worth knowing)
• Your valuables are documented with photographs stored in a cloud backup you can access from abroad

Notify your insurance provider if your trip is particularly long or if you have made recent changes to your property.

Monitored vs. Unmonitored: Why It Matters More When You Are Abroad

Scenario	Unmonitored System	Professionally Monitored System
Alarm triggers at 2am your time	Alert sent to your phone; no action without your response	Monitoring center attempts contact, then dispatches without you
You are unreachable for several hours	No follow-up action	Emergency contact notified, dispatch proceeds
Camera detects motion at entry point	You see it if you check the app	Alert logged; monitoring center can verify and respond
False alarm triggered	You clear it remotely if you can	Verified alarm protocols reduce unnecessary dispatches
Power or wifi outage at home	Remote access interrupted	Monitoring center detects outage, maintains contact via cellular backup

When you are home or nearby, an unmonitored system with a good app can feel like enough. When you are eight time zones away for two weeks, the gap between “alert sent” and “action taken” is the difference between a monitored and unmonitored system. Professional monitoring closes that gap entirely.

Make Sure Your System Is Ready Before You Leave

An alarm system that hasn’t been tested recently, cameras with outdated angles, or a monitoring account with no updated emergency contact are not problems you want to discover from a hotel room in another country.

Chicago Security Expert provides installation, monitoring, and services security systems for homeowners throughout Chicago, the North Shore, and the northwest suburbs.

If you have questions about your current setup or want to make sure everything is working correctly before an extended trip, contact us before your departure date.

Frequently Asked Questions

How far in advance should I set up my home security before traveling abroad? At minimum, one to two weeks before departure. That gives you enough time to test your system, address any gaps, brief your monitoring company, and troubleshoot remote access before you are standing at the airport. Last-minute checks often reveal problems there is no longer time to fix.

Is a smart lock safe to use for a trusted contact while I am away? Yes, and in many ways it is preferable to a physical spare key. Most smart locks allow you to create a temporary access code that you can activate and deactivate remotely. That means your contact has access for exactly as long as you need them to, and you can revoke it without tracking down a key.

How do I keep my Chicago home from looking vacant for two weeks? Lighting on a variable schedule is the most effective visual deterrent. A mail hold with USPS, paused deliveries, and arranged lawn care eliminate the physical signs of absence. A trusted contact who makes periodic passes by the property fills in the gaps a camera and timer cannot cover on their own.